New Review of a Polymorph Duty Cycle Modulation Technique in Industrial Electronics Engineering
Abstract
This paper presents the state of the art of relevant research works, on the theory and application areas of the polymorph DCM (duty cycle modulation) technique. A brief summary of the first review paper about is provided. Then, additional potential research works published until today are outlined. Furthermore, a set of unexplored application areas are illustrated, in order to show unexplored application areas, to be considered in future research works, on polymorph electronic devices for duty cycle modulation, in industrial electronics Engineering.
Full Text:
PDFReferences
Z. Dang, E. R. C. Gamom Ngounou, and J. Mbihi, "Design and virtual simulation of a parallel digital infinite impulse response filter for duty cycle modulation A/D converters", International Journal of Innovations and Applied Study, Vol 34, No. 2, 2021, pp. 293-304.
J. Mbihi, Informatique et Automation : Automatismes programmables controlés par ordinateur, Editions Publibook, , chapter, pp 106-111, Paris 2005.
L. Nneme Nneme, B. Moffo Lonla, G. béatrice Sonfack and J. Mbihi, "Review of a Multipurpose Duty-Cycle Modulation Technology in Electrical and Electronics Engineering", Journal of Electrical Engineering, Electronics, Control and Computer Science, vol. 4, No. 2, 2018, pp. 9-18.
L. Nneme Nneme, and J. Mbihi, "Virtual Simulation and Comparison of Sine Pulse Width and Sine Duty-Cycle Modulation drivers for single phase power converters", Journal of Electrical Engineering, Electronics, Control and Computer Science, Vol 6, Issue 21, 2020, pp. 33-38.
"An Optimal Control Scheme for a Class of Duty-Cycle Modulation Buck Choppers: Analog Design and Virtual Simulation", Journal of Electrical Engineering, Electronics, Control and Computer Science, Vol. 6, Issue 19, pages 13-20, 2020.
L. T. Tatou, F. Pauné, G. W. Kenfack, and J. Mbihi, "A Novel Optical Fiber Transmission System Using Duty-Cycle Modulation and Application to ECG Signal : Analog Design and simulation", Journal of Electrical Engineering, Electronics, Control and Computer Science, Vol 6, Issue 21, 2020, pp. 39-41.
P. Owoundi. Etouké, J. Mbihi and L. Nneme Nneme, "Synthesis of A Digital PID/LQR Control System for Duty-Cycle Modulation Buck Converters", International Journal of Scientific Research in Computer Science Engineering and Information Technology, Vol. 6, Issue 6, 2020, pp. 185-189.
A. Obono, L. Nneme Nneme, J. Mbihi, "Étude expérimentale d’un nouveau modèle d’onduleur solaire monophasé à modulation en rapport cyclique", Afrique Science, No 16, Issue 2, 2020, pp. 118-131.
T. Nna, Nna, S. E. Ndjakomo, and S.P. Ngoffé, "Control of an Active Filter by Duty Cycle Modulation for the Harmonic Decontamination of a Three Phase Electric Network", .Journal of Power and energy engineering. No 8 2020, pp 1-14
M. J. P. Pesdjock, J. R. Mboupda, and D. Tchiotsop, "Minimization of currents harmonics injected for grid connected photovoltaic systems using duty-cycle modulation technique ", International Journal of Dynamics and Control; https://doi.org/10.1007/s40435-020-0 07 18-8.
Ndang Zomo, E . C. Gamom, and J. Mbihi, "Design and virtual simulation of a parallel digital infinite impulse response filter for Duty Cycle Modulation A/D Converters", International Journal of Innovations and Applied Studies, Vol. 34, No. 2, 2021, pp. 293-304
G. M. Ngaleur, C. H. Kom, A. T. Yeremou, S. Eké, and N. Nanfack, "Design of New Duty-Cycle Modulator Structures for Industrials Applications, an Alternative to Pulse-Width Modulation", European Journal of Electrical Engineering, 2021, pp. 103-115, https://doi.org/10.18280/ejee.230203
L. Tatou Nguefack, F. Pauné, and J. Mbihi, "Experimental study of ECG signal transmission system via a coaxial cable line using duty-Cycle modulation", Algerian journal of Engineering and technology, No 24, 2021, pp. 01-06.
G. B. Sonfack and R. Tchinga, "FPGA-Based Multi-Channel A/D Converter by Optimal Duty Cycle Modulation Technique"; Global Journal of Engineering Research - Electrical and Electronic Engineering, Vol. 12, No 1, 2022.
C. Donfack Kengnou, H. C. Kom, and B. Lonla Moffo "Duty cycle modulation and fuzzy controller of a chopper extracting the maximum power point of a solar panel", International Journal of Renewable Energy Research, Vol. 2, No 1, 2022, pp. 71-80.
U. S. OTAM and B. L. Moffo, "Comparative study between duty cycle modulation and gigma-delta (ƩΔ) modulation based on analog to digital conversion", Journal of Electrical and Electronic Engineering, Vol. 16, No. 1,. 2023, pp. 27-32.
Ousmanou Bello, J. Mbihi, and L. NnemeNeme, "Novel Chaotic Strange Phenomena in Piecewise Linear Negative Resistance/Conductance L-C Oscillators : Feasibility Study and Virtual simulation", Wseas Transactions on Circuits and Systems,Vol. 17, 2018, pp. 129-137.
A. R. Adly, H. Y. Abdul-Hamid, A. Elhussiny and E. El-Kholy, "A brief review of the conventional and multilevel invertes topology", IEEE conference on power electronics and renewable energy, February 2023..
J. I. Y Ota, T. D. C. Busarello and J. A. Pomilio, Power Electronic converters and systtems, Vol. 1, chapter 2 (Multilevel converters), August 2024.
J. Jamshed and R. A. Mastromauro, "Filter-less sub-multilevel DC/AC power converters for MV connection ", IEEE Xplorer, 2024 IEEE 18th international conference on compatibility, power electronics and power engineering, June 24-26, 2024.
Refbacks
- There are currently no refbacks.
Copyright (c) 2025 Journal of Electrical Engineering, Electronics, Control and Computer Science
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.